TSPROF K03 Hunter Kit Knife Sharpening System — a set with the necessary minimum for professional sharpening. In addition to the TSPROF K03 sharpening system, there are 5 diamond plates for sharpening, a steel stand weighing 3.3 kg, and everything is delivered in a branded wooden box with lodgement that guarantees safe delivery. This is the best choice for those who need a ready-made kit to immediately start sharpening. A set for sharpening most types of knives, including hunting and kitchen knives. The unique design of the clamps adapts to the shape of the blade.
The modification of the K03 body has no horizontal deviations, the knife is clamped parallel to the table. The modern rack and pinion lift with stepless adjustment allow you to set the angle with an accuracy of 0.05°. The range of working angles is from 7° to 35°, which allows you to sharpen the knives at a total angle of up to 70°.
The movable part is connected to the base by a dovetail, which guarantees absolute accuracy in setting the angle. And an additional locking screw allows you to rigidly lock the lift during roughing operations.
Whole-milled clamps are made of high-strength aircraft aluminum. Due to the monolithic design of the clamps, their main advantage is the increased resistance to pressure on the abrasive stone, which ensures constant angles. When working with this type of clamp, calibration, and adjustment to different knife shapes are not required. They have a simple and convenient clamping principle (using a single key), allowing you to clamp a variety of knives, including knives with descents from the spine, folding knives, and hunting knives.
The unique rotating mechanism has a wide lever that facilitates rotation and ensures reliable auto-locking of the clip frame. In the rotating mechanism, we use only the most reliable materials: the body of the rotating mechanism is made of hardened steel. Thanks to the system of springs and bearings, the frame turns over without the wear of the mechanism.
Sharpen knives with any abrasive you like. The K03 universal abrasive holder supports all stones 6" to 8.5" long and doesn't require a 45° bevel on the sides.
The 3.5 kg TSPROF steel base holds the sharpener on the table and allows you to work without attaching the sharpening system body with a G-clamp.
A set of diamond plates on blanks allows you to immediately start sharpening. The set includes 5 abrasives on aluminum blanks, suitable for complete sharpening of the knife, from roughing to finishing. Diamond plates on a galvanic bundle provide intensive metal removal and can be used for the cutting edge of a knife that has significant damage (chips, jams, etc.).
This product is warranted for 2 years, starting from the date of the products purchase.
During the warranty period, the manufacturer is obliged to repair, or replace the whole product or its parts if appear any defects caused by poor quality of materials or assembly. This warranty is recognized only if the product was used in accordance with the operating instructions, it was not repaired or disassembled by unauthorized experts, and has not been damaged due to improper handling, and also the complete set of products retained. This warranty does not cover normal wear and tear of the product. The warranty does not apply to defects resulting from (After the goods have been delivered to the consumer):
Non-compliance with the rules of operation, use of the product for the purposes for which it is not intended. Unskilled installation that resulted in failure of the elements of the product, or led to the poor performance of the product.
Mechanical damage, traces of chemical effects appeared after the transfer to a consumer.
Damaging or product malfunction caused by pets, domestic insects and pests, other people. Locking of the movable elements resulted by the extrinsic objects getting inside.
Non-compliance with the storage and transportation rules.
Unauthorized changes in product design or the installation of parts which are not provided by a technical documentation and operating instructions.
Increased wear of the products as a result of product use in production purposes, as well as improper maintenance or improper care.
Changing the appearance of the product which does not affect the performance of equipment, due to normal wear and tear.