Whole-Milled Fillet Clamps (2 pcs) for K03 and Kadet

They are designed for sharpening fillet knives, multi-tools, and Scandinavian-type knives, up to 3.5 mm thick.
The mathematically verified radial-convex shape of the outer surface allows you to set the sharpening angle of only 7.2° per side.
Heavy-duty material, aviation aluminum, and new processing technologies have allowed achieving a minimum thickness of the jaws, without loss of wear resistance. The width of the clamps is selected in such a way as to allow you to install up to 4 clamps simultaneously on the frame to securely fix even the most flexible fillet knife.
The clamps do not require calibration and are clamped by tightening just one screw.

Characteristics:

• Length of clamps: 115 mm
• Minimum sharpening angle: 7.2°
• Recommended knife length: 30-300 mm
• Minimum width of a knife: 10 mm
• Jaws thickness: 1 mm
• Clamp width: 21 mm
• The maximum thickness of the spine: is 3.5 mm
• 2 pc.

-For the screwdriver: 2.5 mm.


7,2° can be reached if:
knife's spine thickness 1мм and overhang from 12мм
knife's spine thickness 1,5мм and overhang from 16мм
knife's spine thickness 3,5мм and overhang from 23мм