Triple-coated diamond abrasives kit (4 pcs.)

TS-SH2000940
74.00
Triple-coated diamond abrasives kit (4 pcs.).

The set is intended for grinding. Diamonds are made on a galvanic bond.  Provide intensive removal of metal and can be used for the cutting edge of a knife that has significant damage (chips, cracks, etc.). They work noticeably more aggressively than diamonds on organic and metal bonds with the same grain size and practically do not grease. This is achieved by the prominent diamond grains, while in the metal and organic binder, the diamond grains are recessed into the binder and mixed with it. The bar contains a triple-diamond layer. The diamond layer is located on both sides of the bar, with the same grain on each side. The concentration of diamonds in the layer is 100%. The geometry of the working plane is smooth on both sides, the block does not need to be aligned, the diamond layer is opened during operation. A set of diamond bars comes in a nylon case.

Characteristics:
Length: 150mm
Width: 20 mm
Height: 3mm
Gritness (μm): 28/20, 50/40, 80/63, 100/80.
Powder Brand: AC15

Recommendations for work: before starting, moisten the diamond layer of the bar with water. In the process of sharpening, periodically rinse the diamond layer with clean warm water with a brush and avoid salting. Not intended for use with oil. After stopping, clean from contamination, and rinse in warm water. Store in a dry place.

These stones suit Blitz, Blitz 360, Kadet, K03, Edge Pro, and Pioneer.