The TSPROF K03 - precision-guided knife sharpening system. Become a knife sharpening professional with TSPROF K03. Keep all your knives razor-sharp, sharpen for friends, make money on knife sharpening or, if you make knives, take its sharpness to the next grade.
Sharpening is all about the consistency of the angle. We make the TSPROF K03 of 100% CNC machined metal. Engineers look strictly at tolerance compliance, each unit passes quality control. The same level of high precision machining is used in microscopes or the modern machine tool industry.
A knife flips over from 5 to 100 times per sharpening. Flip the knife in 1 second with the TSPROF K03 rotary mechanism. Fixation is automatic, with no screws or handles.
We designed clamps for ordinary and non-standard blades: kitchen, EDC, hunting, filet knife, machete, ax, planer knife, scissors, chisel, full flat, convex grind knife, machete, and others.

Sharpen knives with any abrasive you like, the K03 universal abrasive holder supports all stones from 150 up to 200mm long, doesn’t require a 45° bevel on sides.
Set any angle you want in 5 seconds using just 1 handle. Use a mechanical angle scale or digital protractor to see the angle instantly and precisely.
The sharpener is built over the modular concept. Get the sharpener’s body and extend it with additional clamps, abrasives, and accessories.

Modification of the TSPROF K03 body Rack-and-pinion lift with step adjustment allows you to set the angle with an accuracy of 0.05°. The range of sharpening angles is from 7° to 35°, which allows you to sharpen knives at a total angle of up to 70°.

The movable part is connected to the base with a dovetail joint, which guarantees the accuracy of setting the angle up to 0.05° And an additional locking screw will allow you to lock the lift during grinding operations.

The rotary mechanism is made of hardened steel.

Whole-milled clamps are made of high-strength aircraft aluminum. Due to the monolithic design of the clamps, their main advantage is the increased resistance to pressure on the abrasive stone, which ensures constant angles. When working with this type of clamp, calibration, and adjustment to different knife shapes are not required.

The 3.5 kg TSPROF steel base holds the sharpener on the table and allows you to work without attaching the sharpening system body with a G-clamp.

Set of the TSPROF abrasive stones Diamond plates on galvanic bond provide intensive metal removing and can be used for the cutting edge with significant damage (chips, bends, etc.).
The set of diamond plates on blanks consists of:
Diamond plate F150 Extra Coarse is used for rough grinding of the edge and by forming the shape of the blade.
Diamond plate F220 Coarse is used for forming the cutting edge.
Diamond plate F400 Medium is used for main sharpening operations and creating the aggressive cut.
Diamond plate F600 Fine is used for pre-finishing of the cutting edge and removing noticeable marks.
Diamond plate F1000 Very Fine is used for finishing the cutting edge.
They work much more aggressively than stones on organic or metallic bonds with the same grain size. It's achieved by protruding diamond grains, whereas grains in organic or metallic bonds are sucked into the binder and mixed with it. The grain concentration in a layer is 100%. Although it should be noticed that these stones will give in to other stones in the duration of work because of thin coating, which will actively remove while sharpening.
You also should remember, that by working with soft steels (up to 58 HRC) these diamond stones will work out faster than by working with harder steels.
Diamond stones on galvanic bonds don't require preparing for work (leveling, "cheering up" etc.).
Abrasive dimensions: 4х25х150 mm
Greatness:
150 grit (FEPA-F)
220 grit (FEPA-F)
400 grit (FEPA-F)
600 grit (FEPA-F)
1000 grit (FEPA-F)

A small universal table is a special clamp designed for sharpening scissors, ice drill blades, chisels, and other tools that are not installed in other clamps.

A case of the German company WAG with the TSPROF brand name, made of hard plastic, is used for carrying the K03 sharpening system.

Dimensions: 50*26*20 cm
Weight: 12kg

K03 Master Kit kit contains:

• K03 Body with main units (sharpening angles are from 7° to 35° per side)
• Set of whole-milled clamps (2 pcs.)
• Set of whole-milled fillet clamps (2 pcs.)
• Single clamp
• Small universal table
• TSPROF. Diamond plates 5 pcs (Extra Coarse, Coarse, Medium, Fine, Very Fine)
• TSPROF steel base for K03 sharpener
• Packaging: TSPROF plastic case
• Manual

K03 Master Kit kit features:

• 100% made of metal
• Fast and precise turning mechanism, turn a knife over for only 1 second, 0.2° precise, no unclamping needed
• Universal abrasive holder, any third-party abrasives fit
• Diamond plates 5 pcs (Extra Coarse, Coarse, Medium, Fine, Very Fine)
• Mechanical angle scale or a reference plate for digital protractor
• Universal table attachment for non-standard knives and tools
• Clamp for fillet knives
• Heavy base for placing on a table 3.5 kg
• Plastic case

This product is warranted for 2 years, starting from the date of the products purchase.
During the warranty period, the manufacturer is obliged to repair, or replace the whole product or its parts if appear any defects caused by poor quality of materials or assembly. This warranty is recognized only if the product was used in accordance with the operating instructions, it was not repaired or disassembled by unauthorized experts, and has not been damaged due to improper handling, and also the complete set of products retained. This warranty does not cover normal wear and tear of the product. The warranty does not apply to defects resulting from (After the goods have been delivered to the consumer):
Non-compliance with the rules of operation, use of the product for the purposes for which it is not intended. Unskilled installation that resulted in failure of the elements of the product, or led to the poor performance of the product.
Mechanical damage, traces of chemical effects appeared after the transfer to a consumer.
Damaging or product malfunction caused by pets, domestic insects and pests, other people. Locking of the movable elements resulted by the extrinsic objects getting inside.
Non-compliance with the storage and transportation rules.
Unauthorized changes in product design or the installation of parts which are not provided by a technical documentation and operating instructions.
Increased wear of the products as a result of product use in production purposes, as well as improper maintenance or improper care.
Changing the appearance of the product which does not affect the performance of equipment, due to normal wear and tear.