The TSPROF K03 - precision-guided knife sharpening system. Become a knife sharpening professional with TSPROF K03. Keep all your knives razor-sharp, sharpen for friends, make money on knife sharpening or, if you make knives, take its sharpness to the next grade.
Sharpening is all about the consistency of the angle. We make the TSPROF K03 of 100% CNC machined metal. Engineers look strictly at tolerance compliance, each unit passes quality control. The same level of high precision machining is used in microscopes or the modern machine tool industry.
A knife flips over from 5 to 100 times per sharpening. Flip the knife in 1 second with the TSPROF K03 rotary mechanism. Fixation is automatic, with no screws or handles.
We designed clamps for ordinary and non-standard blades: kitchen, EDC, hunting, filet knife, machete, ax, planer knife, scissors, chisel, full flat, convex grind knife, machete, and others.
Sharpen knives with any abrasive you like, the K03 universal abrasive holder supports all stones from 150 up to 200mm long, doesn’t require a 45° bevel on sides.
Set any angle you want in 5 seconds using just 1 handle. Use a mechanical angle scale or digital protractor to see the angle instantly and precisely.
The sharpener is built over the modular concept. Get the sharpener’s body and extend it with additional clamps, abrasives, and accessories.
Modification of the TSPROF K03 body Rack-and-pinion lift with step adjustment allows you to set the angle with an accuracy of 0.05°. The range of sharpening angles is from 7° to 23°, which allows you to sharpen knives at a total angle of up to 46°.
The movable part is connected to the base with a dovetail joint, which guarantees the accuracy of setting the angle up to 0.05° And an additional locking screw will allow you to lock the lift during grinding operations.
The rotary mechanism is made of hardened steel.
Whole-milled clamps are made of high-strength aircraft aluminum. Due to the monolithic design of the clamps, their main advantage is the increased resistance to pressure on the abrasive stone, which ensures constant angles. When working with this type of clamp, calibration, and adjustment to different knife shapes are not required.
The 3.5 kg TSPROF steel base holds the sharpener on the table and allows you to work without attaching the sharpening system body with a G-clamp.
The digital protractor allows you to determine the angle with an accuracy of 0.1° and helps to control the angle during the sharpening process when the frame is flipped over when changing the abrasive stone or sharpening the knife.
Set of the TSPROF abrasive stones Diamond plates on galvanic bond provide intensive metal removing and can be used for the cutting edge with significant damage (chips, bends, etc.).
The set of diamond plates on blanks consists of:
Diamond plate F150 Extra Coarse is used for rough grinding of the edge and by forming the shape of the blade.
Diamond plate F220 Coarse is used for forming the cutting edge.
Diamond plate F400 Medium is used for main sharpening operations and creating the aggressive cut.
Diamond plate F600 Fine is used for pre-finishing of the cutting edge and removing noticeable marks.
Diamond plate F1000 Very Fine is used for finishing the cutting edge.
They work much more aggressively than stones on organic or metallic bonds with the same grain size. It's achieved by protruding diamond grains, whereas grains in organic or metallic bonds are sucked into the binder and mixed with it. The grain concentration in a layer is 100%. Although it should be noticed that these stones will give in to other stones in the duration of work because of thin coating, which will actively remove while sharpening.
You also should remember, that by working with soft steels (up to 58 HRC) these diamond stones will work out faster than by working with harder steels.
Diamond stones on galvanic bonds don't require preparing for work (leveling, "cheering up" etc.).
Abrasive dimensions: 4х25х150 mm
150 grit (FEPA-F)
220 grit (FEPA-F)
400 grit (FEPA-F)
600 grit (FEPA-F)
1000 grit (FEPA-F)
The convex edge attachment is presented in the form of a replaceable adapter, which is mounted on the abrasive holder.
The convex edge is better than V-shaped to withstand shock loads, such as when cutting reeds, coastal shrubs, and grass, large raw bones, dead branches. Lenticular sharpening is more effective for deep cutting compared to knives with V-shaped sharpening, provided that the blade thickness is similar - this is due to less 'sticking' to the material. This form is most suitable for long-bladed combat weapons, large knives, and logging axes.
A small universal table is a special clamp designed for sharpening scissors, ice drill blades, chisels, and other tools that are not installed in other clamps.
Dialux Blanc polishing compound supplied with a leather blank is used for the final polishing of the knife.
A case of the German company WAG with the TSPROF brand name, made of hard plastic, is used for carrying the K03 sharpening system.
Folding magnifier with 40x magnification to control the process of sharpening the cutting edge of the knife. It has a plastic body with a metal protective cover. The backlight of two white LEDs allows you to view the details of the cutting edge condition and check the maintenance of the sharpening angle.